loading
reading
writing
saving
searching
Tektronix Tekscope THS710 STD Auto Ranging 60MHz Scope DMM Oscilloscop - $300 (Camarillo)
QR Code Link to This Post
The Tektronix THS710 Std oscilloscope is a graph-displaying device ﾖ it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.
The Tektronix THS710 Std oscilloscope's simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the ﾓmoving partsﾔ of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.
Features & Benefits
60 MHz Bandwidth
250 MS/s Sampling Rates per Channel
Two Channels and Dual Digitizers
External Trigger
33/4 Digit DMM with Datalogger
Roll Mode
Extra Bright Backlit Display
8 ns Glitch Capture
Independently Floating Isolated Oscilloscope and DMM Channels for Safety
Full Floating Measurement Capability up to 600 VRMS
Advanced Trigger ﾖ Delay, Pulse and Video (Line Count and Field Select)
21 Automatic Measurements
RS-232 Programmability/ Communications
NiCd Battery and AC Adapter
Applications
Field or Bench Electronic Troubleshooting
Floating (Nongrounded) System Measurements
Oscilloscope Functions
Bandwidth: 60 MHz
Sample Rate (each channel): 250 MS/s
Channels: Two
Sensitivity: 5 mV to 50 V/div (to 500 V/div with 10X probe).
Position Range: ±10 div.
DC Gain Accuracy: ±2%.
Vertical Resolution: 8-Bits.
Record Length: 2500 points.
Horizontal Accuracy: ±200 ppm.
Roll Mode: = 0.5 s/div.
Autorange: User-selectable.
Trigger Modes: Auto, Normal.
Trigger Types: Edge, Pulse, Video, External.
Video Trigger Formats and Field Rates: Odd field, even field and line.
External Trigger Input: 5 MHz TTL compatible.
Waveform Processing: Add, Subtract, Multiply, Calculate Watts = V x I.
Waveform Storage: 10 waveforms.
Acquisition Modes: Sample, Envelope, Average, Peak Detect.
Cursor Measurements: delta Volts, ? Time, 1/? Time (Hz), Degree (phase).
Cursor Types: Horizontal Bars, Vertical Bars, Paired (volts @ time).
Display System: Interpolation: Sin(x)/x. Format: YT and XY. Mode: Vector, Dot, Vector Accumulate, Dot Accumulate.
DMM Specifications
DC Voltage Ranges: 400.0 mV to 880 V.
DC Volts Accuracy: ±(0.5% of reading + 5 counts).
True RMS AC Voltage Ranges: 400.0 mV to 640 V.
Maximum Float Voltage: 600 VRMS CAT II, each channel (probe dependent).
Resolution: 4000 count, 3-3/4 digits.
AC Volts Accuracy: ±(2% of reading + 5 counts).
Resistance Ranges: 400.0 O to 40.00 MO.
Resistance Accuracy: ±(0.5% of reading + 2 counts); 40 MO: ±(2% of reading + 5 counts).
Diode Test Range: 0 to 2 V.
Continuity Check: Audible tone when < 50 O.
Modes: Min, Max, ?, Max-Min, Avg, Hold.
Nonvolatile Storage: 10 DMM screenshots.
External Trigger Input: 5 MHz TTL compatible.
Vertical Zoom Capability: 2X, 5X, 10X.
dB Scale: Selectable, referenced from 1 mV to 10 V.
dBm Scale: Selectable, referenced from 50 O to 600 O.
General Specifications
Setups: 10 front-panel setups.
Safety: UL3111-1, CSA1010.1, EN61010-1, IEC61010.1.
EMC: Meets Directive 89/336/EEC.
Power: NiCd rechargeable battery pack with AC adapter (both included).
Display: Backlit LCD.
Display Resolution: 320 x 240.